Menu
Whether upgrading an existing venue, seeking to optimize costs, or extend system coverage, DOMEX has a unique level of flexibility and allows for an almost seamless transition to the next level of smart on any scale.
Centralized system
A centralized system architecture allows you to fully implement the rich functionality and exceptional value of the H10 Genius controller. Whether replacing a legacy system or purposefully opting for a centralized architecture, the H10 can be used in Master or Slave mode to accommodate a colossal number of managed endpoints and universal I/O terminals, all from a small box at the core of your living space.
Distributed system
Any Domex switch bears the versatility to either be a control point for the user, and a supplemental active end point for lighting, dimming, shutter or shade control. More so, this enables the option for a smooth and streamlined extension of the DOMEX system to accommodate more space, more features, more control.
The ability to control the same light or shutter point from different points in the house is always a challenge for traditional systems during the network design phase. Mesh networks offer an elegant solution to this problem, allowing for wireless communication between end points, defining commands during installation, and creating a versatile system that’s adaptable to the customer’s needs.
The heart of the system is
entirely wireless
Domex circuit breakers
communicate independently
of a central controller
Each circuit breaker acts as an
amplifier for all other circuit
breakers on the network
Switches act as both
transmitters and receivers,
allowing for instant
communication correction
itself in the event of a malfunction
Z-wave systems communicate
with all Z-wave products in the
world
Technology costs are
relatively low
Considerably lower power
consumption
Domex offers power switches with a wide range of combinations, options, and panel designs to suit any room and functionality. These allow the user to control lights, shades, shutters, water heaters, air conditioners, and any other 3rd-party equipment.
Each Domex wall unit is comprised of two main components:
All of the above switch units can operate independently, as part of the Domex Home Automation system, or as part of any other Z-wave network.
One of 3 built-in electronic bodies (D6, R6, R3 or SAT), each allowing for various dimmer, relay, and SAT modes (for scenarios) and dimmer/power/motor combinations
6 Relay10A EU/US/AU
6 HV Relay 10A each
Max load 16A per channel
Offers various combinations of lighting and shutter
controls, as well as 3rd-party appliances
Operation Voltage | Isolated AC 70/220V 50-60HZ |
Relay | Six 6 relay HV 10A Each |
Terminals | CUI 5.0 mm pitch |
Mounting Back Box | Mounting Back Box |
EU Standard | 3 Module – 58mm H X 94 mm W X 49mm D |
4 Module – 58mm H X 116mm W X 52mm D | |
AU Standard | |
US Standard | |
Operating temperature | -40 / +70 |
6 Dimmer EU/US/AU
4 HV Dimmer + 2 0-10V
HV Dimmer Max load 8A per channel
Offers various combinations HV and 0-10V Dimmer
controls, as well as 3rd-party appliances
Operation Voltage | Isolated AC 70/220V 50-60HZ |
High Voltage Dimmer | 4 High Voltage 220V Dimmer 8A Each |
0-10V Dimmer | 2 0-10V / 1-10V control |
Terminals | CUI 5.0 mm pitch |
Mounting Back Box | Mounting Back Box |
EU Standard | 3 Module – 58mm H X 94 mm W X 49mm D |
4 Module – 58mm H X 116mm W X 52mm D | |
AU Standard | |
US Standard | |
Operating temperature | -40 / +70 |
3 Relay16A EU/US/AU
3 HV Relay 16A each with external Line input.
Max load 16A per channel
Offers various combinations of lighting and shutter
controls, as well as 3rd-party appliances
Operation Voltage | Isolated AC 70/220V 50-60HZ |
Relay | Six 3 relay HV 10A Each |
Terminals | CUI 5.0 mm pitch |
Mounting Back Box | Mounting Back Box |
EU Standard | 3 Module – 58mm H X 94 mm W X 49mm D |
4 Module – 58mm H X 116mm W X 52mm D | |
AU Standard | |
US Standard | |
Operating temperature | -40 / +70 |
Each Electrobox contains within it one of 3 different smart cards with various capabilities.
– The SS Intellicard operates products that use the Z-wave 700 protocol
– The EP Intellicard works with appliances that transmit on Z-Wave 700, BLE, and WiFi protocols
– And the incredible CON Intellicard, which offers Z-Wave 700 chipset, BLE, and WiFi capabilities AND contains a
Linux Microprocessor, which transforms it into both an end-point switch and entire home controller.
3 Relay16A EU/US/AU
3 HV Relay 16A each with external Line input.
Max load 16A per channel
Offers various combinations of lighting and shutter
controls, as well as 3rd-party appliances
Operation Voltage | Isolated AC 70/220V 50-60HZ |
Relay | Six 3 relay HV 10A Each |
Terminals | CUI 5.0 mm pitch |
Mounting Back Box | Mounting Back Box |
EU Standard | 3 Module – 58mm H X 94 mm W X 49mm D |
4 Module – 58mm H X 116mm W X 52mm D | |
AU Standard | |
US Standard | |
Operating temperature | -40 / +70 |